Buffing Compound BUFA BF 150

BF 150 Polishing Paste extra fine
Finishing polishing paste – fine-grained

Product Description

BF 150 Polishing Paste extra fine is a carefully selected
combination of very fine abrasive particles suspended in paste.
It contains no silicon, ammonia or waxes. BF 150 paste can be
used for hand and machine polishing.

Applications

BF 150 Polishing Paste extra fine was created for the final
polishing to a high gloss during the repair, maintenance and
preparation of GRP moulds and products made from polyester,
vinylester or epoxy resins. Optimal surface gloss
of moulds and products is achieved after preliminary application
of BF 50 and BF100.

Density at 20 °C DIN 53 217/2 approx. 2.05 g/ml 

Non-flammable substance content 37 + %

Flash point DIN 53 213 +65 °C 

Directions for use

BF 150 Polishing Paste extra fine is used after preliminary polishing
of the surface with BF 50 or BF 100. Apply it with a clean, soft
cloth to a surface area of approx. 50 x 50 cm and polish with moderate
pressure until a uniform, glossy surface is achieved. If a
polishing machine is used, the maximum set
speed should not exceed 2100 rpm. To achieve a very
high gloss, increase the polishing pressure as the
paste dries.

Note! 

During work, the cloth used should be cleaned regularly!.
Notes: After prolonged storage, the paste should be mixed before use
with a spatula or wooden stick.

Storage/ Use

The product must be stored in a dry and cool place, in closed containers
protected from frost. The product shelf life is 6 months for originally sealed
packaging stored under appropriate conditions.