GB FLOOR PAS C - PREMIUM polyaspartic resin flooring, UV resistant - 15 kg (ready-to-use A+B kit for 30 meters)

15 kg kit (Component A 10 kg + Component B 5 kg)

GB FLOOR PAS C is a two-component, thin-film polyaspartic resin in RAL colors, designed for creating durable and highly resistant protective and decorative coatings on concrete, asphalt, and synthetic floors. The system consists of Component A – polyaspartic resin with RAL pigmentation, and Component B – aliphatic polyisocyanate hardener. It is fully UV-resistant and suitable for both interior and exterior applications. 

A 15 kg kit of resin should be sufficient for 30 square meters with 2 coats, or 50 square meters with 1 coat.

The product is particularly effective where quick renovation, an aesthetically sealed surface, and a durable finish layer are required for professional applications.

Why choose it?

• Modern polyaspartic technology – a fast, durable system for thin-film floor protection.
• RAL colors – the ability to match the floor's appearance to the building's character or the company's visual identity.
• For renovation and sealing surfaces – an ideal finish layer for properly prepared mineral and synthetic substrates.
• Two-component A+B system – a fixed mixing ratio makes it easier to prepare the material correctly.
• Professional application – the product is designed for contractors and users with experience working with floor resins.

Applications

• renovation of concrete floors,
• sealing and protecting concrete, asphalt, and synthetic surfaces,
• garages, workshops, technical rooms,
• halls, warehouses, walkways,
• protective and decorative coatings in commercial and industrial buildings.
• terraces and balconies,
• restaurants, shops, and public buildings

Technical data

Mixing and application instructions:

1. Thoroughly mix Component A before use.
2. Add Component B in a ratio of 100 : 50 by weight.
3. Mix with a low-speed mixer for approximately 2–3 minutes, scraping the material from the walls and bottom of the container.
4. Pour the mixture into a clean container and mix briefly again.
5. Apply evenly to the prepared substrate, according to the system application technology.
6. Do not dilute the ready-mixed mixture with random solvents, water, or other additives.

Substrate preparation

• The substrate should be load-bearing, clean, dry, and free from grease, dust, cement milk, and weak layers.
• For concrete, mechanical surface preparation is recommended, e.g., grinding or shot blasting.
• Before application, ensure that the substrate is properly primed and complies with the floor system requirements.
• Do not apply to damp substrates or in conditions of water vapor condensation.

Storage and working conditions

• Store the components separately, in their original, tightly sealed packaging.
• Protect from moisture, direct sunlight, sources of ignition, and temperatures above +40°C.
• Work in well-ventilated rooms.
• After opening the packaging, use the product according to the manufacturer's recommendations and the principles of working with two-component systems.
  
  

Health and safety and disposal

• Product intended for professional use.
• Use protective gloves, safety glasses or face protection, and workwear.
• Ensure adequate ventilation, especially during mixing and application.
• Avoid contact with skin and eyes, and inhalation of vapors or aerosols.
• Component B contains a polyisocyanate hardener – read the safety data sheet before use.
• Dispose of waste and packaging in accordance with local regulations.

The information provided is for technical and informational purposes. Before use, read the safety data sheet and perform an application test under real conditions.