Buffing Compound BUFA BF 50

BF 50 Polishing Paste is a carefully formulated
combination of highly effective abrasive particles suspended in
a paste. It contains no silicon, ammonia or waxes. BF 050 paste can
be used for hand and machine polishing.

Applications

BF 50 Polishing Paste has been developed for preliminary polishing
of scratches and scuffs on GRP moulds and products made from polyester,
vinylester or epoxy resins. It is suitable for
wet or dry sanding. It is usually used after P-800
sandpaper.
Subsequent polishing of the product surface with BF 100 or BF150 paste
guarantees a high gloss finish.

Density at 20 °C DIN 53 217/2 approx. 2.05 g/ml 

Non-flammable substance content 37 + %

Flash point DIN 53 213 +65 °C 

Directions for use

Apply the paste with a clean, soft cloth to a surface area of approx. 50 x 50 cm
and polish with moderate pressure until a uniform,
glossy surface is achieved. If a machine
polisher is used, the maximum set speed should not exceed
2100 rpm. To achieve a very high gloss, increase the pressure
during polishing as the paste dries.
Note! During use, the cloth should be cleaned regularly!.
After preparing the mould, apply a release layer using BF 700 or
BF 800; between demoulding operations, use BF 500.

Notes:

After prolonged storage, the paste should be mixed before use
with a spatula or wooden stick.

Storage/ Use

The product must be stored in a dry and cool place, in closed containers
protected from frost. The product has a shelf life of 6 months for originally sealed
packaging stored under suitable conditions.